Tip Technique Tuesday - Designing Your Own Basket

On Sunday, I showed you some casserole carriers that I wove around a Corning Ware dish. I've had e-mails asking how to do this and how I design my own baskets.
From time to time I like to weave a basket to contain something specific like this Corning Ware dish. I've also woven around plastic containers of various sizes. These plastic containers basically become a liner for the basket. This way, I can put food or plants in my baskets and I don't have to worry about my baskets becoming damaged or wet.
The way I start designing the basket is I know what purpose I want to use the basket for.
If I want to weave it around something like this dish in the picture, I measure around it. Look closely at the photo. My tape measure extends two inches on each side of the basket. I would cut my stakes for this basket 17". This gives me room to cut and tuck and I won't run short when I get to the top. So basically, measure the three sides (side, bottom, side) and add 4 inches. If it is a large basket, I would add 6" or an extra 3" to each side. Make sense?
Then I almost always use 1/2" flat or 5/8" flat for my stakes or spokes. I weave typically with thinner reed than my spokes so 3/8", 1/4" or 11/64" flat or flat oval or round reed, anything that is thinner or more flexible than my stakes. If I use fillers for my base, I often use 3/8" or 1/2" flat. To know the number of stakes to cut, you're just going to have to do the math on your particular project. It depends on what size stakes you are using and the spacing you choose between each stake.
As I weave up the sides, my creativity just guides me. I just have a finished height in mind. For my rim row, I weave 1/8" narrower reed than what I'm going to use for my rim. for example, if my rim is 1/2" flat/oval, I would weave my top rim row 3/8" flat.
Have you ever been at a store and saw a basket you really liked and thought you could weave it at home with a higher quality look and in colors that matched your decor? Just keep your tape measure in your purse and measure around the basket like I did in the photo. Take a few notes as to what sizes of materials they used and the finished dimensions of the basket. Then you can go home and weave it with better quality products, better reed, better handles etc.
Be sure to post a comment or send me an e-mail if you have further questions about this. I hope it gets you started on designing your own baskets. As always, be sure to let me know when you finish a basket and post me a link to its photo.
Happy Weaving,
Nancy